It’s the wizard of cracks
Do you believe a glass crack and disappear in 30 minutes? We often think “oh shoot” when we detect a crack or blemish in our car windshield or windows, and think we’ll have to haul off our car to an auto repair shop for a costly job — but — what if we told you this magical Windshield Scratch Repair Liquid could save you a trip?
![1](https://img.sellvia.com/uploads/2021/11/08/3bda6a.png)
Magic before your eyes
Repair cracks in a flash
1. Carefully remove glass debris (if there is any) from the crack site.
2. Screw open the resin applicator and use the head to apply the resin into
the center of the glass crack.
3. Paste one sheet of curing strip over the crack spot, ensuring no gaps
or air bubbles.
4. Let the application dry under sunlight for about 20-30 minutes.
5. Your crack should be healed. You can use the included razor blade to remove any residual dry resin. If your crack hasn’t healed, you may repeat this process.
2. Screw open the resin applicator and use the head to apply the resin into
the center of the glass crack.
3. Paste one sheet of curing strip over the crack spot, ensuring no gaps
or air bubbles.
4. Let the application dry under sunlight for about 20-30 minutes.
5. Your crack should be healed. You can use the included razor blade to remove any residual dry resin. If your crack hasn’t healed, you may repeat this process.
![2](https://img.sellvia.com/uploads/2021/11/08/2e1895.png)
A magical, money-saving solution
A reinforced injection sealant dispensing head releases our advanced resin formula with strong pressure for accurate application. Effectively minimize the appearance of chips and cracks while stopping them from spreading — all without spending big bucks.
Undo just about any glass damage
Repair a multitude of window or windshield chips and cracks — from bugs, cobwebs, half-moon cracks, star-shaped cracks, and combination-style damage. Note cracks have to be less than 1 in / 25 mm in diameter in order for effectiveness. For best results, repairs should be made as soon as possible after the damage occurs and before the crack site is contaminated by dirt or water. Avoid the use of any glass treatments one week post-repair.
For every “oops” and “ugh”
on the road
on the road
Loose gravel on the freeway, minor auto accidents, and more unpredictable happenings can cause divots and cracks in your car’s windows or windshield. Remove unsightly damage without a trip to an auto shop with this Windshield Scratch Repair Liquid. Each order includes everything you’ll need.
1 x Windshield Scratch Repair Liquid
5 x Curing Strips
1 x Sleeved Razor Blade
I used this kit recently to repair a crack in my windshield about 1/2 inch long. The instructions are pretty simple to follow.
One trick they tell you in the instructions is to heat the windshield from the inside with a hair dryer in order to get the resin to flow into the crack better. That helped a lot. Once you can see the crack is totally filled in, you remove the tool, put one drop on the hole, place a clear plastic piece over it and put your car in the sun for 15 minutes (or 1 hour if it’s overcast) and the UV light will cure the resin. Finally remove the plastic and scrape away the excess from your windshield using the enclosed razor blade.
My crack was tiny and I almost can’t even see it any longer. This kit really does the job and can be used multiple times until you run out of the resin solution.
The instructions are daunting at a glance but you can break it down to these steps:
Clean you window of foreign debris
Force the resin into the crack/chip with the applicator (IN THE SHADE) (even if you make a mess by overfilling, it’s OK)
Let the resin cure with the cure strip
Peel off curing sheet and scrape the glass with the blade perpendicular to the glass
Done!
Amazing product! I don’t think I’m ever going to Safelite Autoglass again for chip repair!
The product does need about 10minutes in FULL SUN to cure (i.e., harden) the product and form the permanent bond to the glass.
I fixed 2 star chips, and further patched another 3 “pock marks” in the windshield
Hints:
* Warm the glass by turning on you defogger on heat
* use the razor, or tip of a small file to pick out the compacted glass at the center of the impact
* Product needs time to diffuse into the crack under pressure
* make sure there are no air bubbles when you apply the curing strip
* Give a full 10min (or more) before you try to scrape the product off
* when scraping, use a “squeegee” motion with the razor at 90-degrees to the windshield. It should take multiple passes to scrape the product down to a finished level (multiple, like several dozen passes scraping)
GOOD LUCK!
-Inexpensive! Great product to keep in your garage for quick repairs.
-Simple method.
-All tools included, along with detailed instructions that include photos.
-Plenty of resin for performing 5+ repairs, potentially more than ten.
-Resin cures only when exposed to UV light (e.g. sunlight), so is easy to work with and clean up.
-The kit is able to inject resin deep into most cracks, displacing air bubbles and restoring the look of the glass.
My windshield had been hit by a rock going around 85mph. It left a small chip that ended up turning into a crack that ran for about half an inch either way from the chip. That meant I had a small crack (approximately 1″ long) and a small chip to boot. I read the reviews on this product and I was scared that I would either screw it up or it wouldn’t be perfect. Honestly, I couldn’t have asked for better results. The crack is invisible now, unless you REALLY try to find it, and the chip is completely gone. I did as the instructions said, applied the product in the shade and moved my car into the sun. It took me about 5 minutes of real work and about half an hour of not paying attention to make my windshield crack disappear.
I’d recommend this product to anyone who has small cracks. It yielded unbelievable results.
This was my first attempt at chip repair. Admittedly it took me a bit longer than it should have to get the technique correct, but eventually I got there. If you think that you are going to be able to make a chip disappear completely with a $10 DIY repair kit, you are delusional. It does however make the chip much less noticeable, and it filled the chip completely. I performed the repair 6 months ago on a bulls-eye/star chip , and it is still holding strong with out spreading or cracking any further. I am about to buy another kit for one of our work trucks. I would definitely recommend this kit if you are patient, can follow directions, and observe what is happening and not happening and make the necessary adjustments to get the results for which you are looking. It’s definitely not rocket science, but common sense is a requirement.
This simple kit saved me purchasing a replacement windshield. As usual a stone kicked up from a vehicle in front of me, causing a small star-shaped cavity in my windshield. It did not however result in crack lines extending beyond the center of the impact.
After about 1/2 hour of effort (most of it just waiting) my windshield is much improved, good enough that I basically don’t see the “dit” unless I stare right at it. The little impact zone has the appearance of a tiny circular smudge on the outside of the glass, the internal spider of broken material is now visually gone.
The process is easy and works well if you follow the clear instructions.
I’m saving my insurance for the really big events (no hurry on that one!).